This kit is designed to extend the cable of a Raspberry Pi camera. We tested it succesfully with 4m (13ft) of ribbon cable.
This kit contains everything you need to place your camera further from the raspberry pi than the standard 15cm (6").
We supply this kit with two styles of connectors: Straight, and right-angle (as seen on the picture with the calipers).
If you want us to assemble the ribbon cable, you'll need to order the appropriate amount of 16-way ribbon cable (click here!).
If you don't order any 16-way ribbon cable, you won't get the gray ribbon cable. (but we will include the IDC connectors to make one yourself). If you order more than one camera extension kit and the cable to go with it, please put a comment with your order during the payment process. (e.g. 3m of cable can be split as 1m+2m or 1.5+1.5)
- 2 FPC to 2x8pin header adapter boards
- 2 16-way IDC connectors
- 1 15cm opposite-side contacts FPC cable
Straight has no bends in the pins used for the connector. The connector therefore ends up at a right angle to the board.
Right-angle is with a bend in the pins used for the connector. The connector therefore ends up parallel to the board.
Documentation for this kit