Blog 13

Scroll Menu

In this blogpost I am making a Scroll Menu, what is a menu where I make a choose from a list of my previous and future menus. This is pretty handy so that I don't have to type in a command line to go to an other menu. Everything can just be controlled with the buttons on the Rp_ui_board.

The mission is to make it possible that the menu goes up and down and that I than get select between the 2 options displayed on the first and second line of the Rp_ui_board. What every button does:

• 1. Select option 1
• 2. Select option 2
• 3. Go to the begin of the menu
• 4. Go to the End of the menu
• 5. Scroll down in the menu
• 6. Scroll up in the menu

For this script I used some techniques from the previous script blog 12(AlarmMenu). The 2 scripts I previous made are also included as option 1(blog 10) and 2(blog 12) in the Script Menu.

Don't forget to make an exit function in every script you make that you want to put in the array of menus!

array=( pushmenu2 AlarmMenu Jaap Tim Martin Koos Willem Bas Luuk Richard Nick Alex)
# Element 0       1         2    3   4      5    6      7   8    9       10   11

An array is a list names that are put together and you can find with asking for it's number. The number counting of arrays begins with 0 and ends until you stopped giving names. For this I used 2 names of previous scripts and 10 other random names. ( I don't have 10 other menu scripts, so I only made it to show that it works )

Narray=( "Temp Menu" "Alarm Menu" Settings "Board menu" "Fries Menu" "Banana Menu" "vega burger" "wc menu" Bananaphone "2001:ABC" "ghost server" "My  name is...")
# Element 0           1           2         3            4            5             6             7        8            9          10             11

This is the second script and I called it Narray. (Names Array. You can of course call it what ever you want ) This array I made to print this text out on the display. I also could just have used the previous array, but with the second array I can print better names on the display. As you can see some of them don't use quotation marks, I only did that to show that you only really need to put quotation marks if you want to print a text with a space in it. The display is 16x2, so you can only use a maximum amount of 16 characters in every row.

if [ $BDetect  = "20" ]; then
   ./${array[$Number]}
fi

if [ $BDetect  = "10" ]; then
  ./${array[$Numb2]}
fi

This part checks if button 1(20) or 2(10) is pressed. If one of the buttons is pressed look in the array with the given number and will than run that script. So if button 1 is pressed and Number = 2 it will run Jaap. And if button 2 is pressed and Numb2 = 3 it will run Tim.

if [ $BDetect  = "02" ]; then
  Number=$(((Number + 10) % 12 )) #can be changed to 11 if you want it to get 1 down
fi
 
if [ $BDetect  = "01" ]; then
  Number=$(((Number + 2) % 12 )) #can be changed to 1 if you want to get it up by 1 / I did 2 because I think that is more functional.
fi

In this part it counts up or down with which the button is pressed. With button 5 is counts down an with button 6 it counts up. The program counts down and up with 2, thanks to that every time 2 new options gets showed on the display. In the array there are 12 menus, so I used %12 so that when counting up or down it will continue at the top or the beginning. ( so that you not have to go all back to option 1-2 when you are at option 11-12. ) I also explained working with % in blog 12: With % it divides the number before it with the number after it and will give as result the number that couldn't get shared through it. So simple examples:

12%5 (12:5)=2   | 2 times 5  | 2*5=10  | 12-10 = 2
14%12 (14:12)=1 | 1 time  12 | 1*12=12 | 14-12 = 2 

The numbers that are given as result for pressing the button, will then be send to the last part of the script.

Numb2=$((Number + 1))
Numb3=$((Numb2 + 1))

Numb2 and Numb3 will read the numbers that later should be displayed. The given numbers will get a +1, because otherwise the menu will start with 0 instead of 1. This is of course the same with the second line. That also has to be 1 more.

The given numbers will be printed at the beginning thanks to "$Numb2"at the first row and "$Numb2" at the second row. After that it will print the names on the name Array.( Narray ) Thanks to Narray reading the numbers [$Number] and [$Numb2].

bw_tool -I -D /dev/i2c-1 -a 94 -W 11:00
bw_tool -I -D /dev/i2c-1 -a 94 -t "$Numb2""."${Narray[$Number]}
bw_tool -I -D /dev/i2c-1 -a 94 -W 11:20
bw_tool -I -D /dev/i2c-1 -a 94 -t "$Numb3""."${Narray[$Numb2]}

The script all together is:

#!/bin/bash
bw_tool -I -D /dev/i2c-1 -a 94 -W 10:00

while true; do
BDetect=`bw_tool -I -D /dev/i2c-1 -a 94 -R 30:b`

array=( pushmenu2 AlarmMenu Jaap Tim Martin Koos Willem Bas Luuk Richard Nick Alex)
# Element 0       1         2    3   4      5    6      7   8    9       10   11

Narray=( "Temp Menu" "Alarm Menu" Settings "Board menu" "Fries Menu" "Banana Menu" "vega burger" "wc menu" Bananaphone "2001:ABC" "ghost server" "My  name is...")
# Element 0           1           2         3            4            5             6             7        8            9          10             11

 if [ $BDetect  != "00" ]; then
    bw_tool -I -D /dev/i2c-1 -a 94 -W 10:00
 fi

 if [ $BDetect  = "20" ]; then
    ./${array[$Number]}
 fi

 if [ $BDetect  = "10" ]; then
   ./${array[$Numb2]}
 fi

 if [ $BDetect  = "08" ]; then
    Number=0
 fi

 if [ $BDetect  = "04" ]; then
    Number=10
 fi

 if [ $BDetect  = "02" ]; then
    Number=$(((Number + 10) % 12 )) # can be changed to 11 if you want it to get 1 down
 fi

 if [ $BDetect  = "01" ]; then
    Number=$(((Number + 2) % 12 )) #can be changed to 1 if you want to get it up by 1 / I did 2 because I think that is more functional.
 fi

Numb2=$((Number + 1))
Numb3=$((Numb2 + 1))

bw_tool -I -D /dev/i2c-1 -a 94 -W 11:00
bw_tool -I -D /dev/i2c-1 -a 94 -t "$Numb2""."${Narray[$Number]}
bw_tool -I -D /dev/i2c-1 -a 94 -W 11:20
bw_tool -I -D /dev/i2c-1 -a 94 -t "$Numb3""."${Narray[$Numb2]}

sleep 1

done