FT245RL V1.5
Revision as of 16:50, 6 November 2015 by Cartridge1987 (talk | contribs)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This is the documentation page for the FT245RL breakout board. That can be bought in the BitWizard shop.
Overview
The FT245RL breakout board has an USB connector, one 16-pin IO connector. The brains of the PCB, of course, is an FT245RL chip.
External resources
Pinout
The 16-pin connector is connected as follows:
5V | 3V3 |
TXE# | RXF# |
RD# | WR |
D7 | D5 |
D5 | D4 |
D3 | D2 |
D1 | D0 |
GND | GND |
LEDS
- The only LED is a power LED
Jumper settings
The only jumper is for selecting the I/O voltage. Place the jumper on the left side for 3V3, or on the right side for 5V.
future hardware enhancements
Changelog
1.1
- Initial public release