Difference between revisions of "Blog 24"

From BitWizard WIKI
Jump to: navigation, search
(The code)
(The code)
Line 45: Line 45:
 
The parts of the script that I will give some explanation:
 
The parts of the script that I will give some explanation:
  
#include <stdio.h>
+
Here I made a list of colors(if you also want other colors search for: color table):
#include <stdlib.h>
 
#include <unistd.h>
 
 
 
  #define WHITE  0xffffff
 
  #define WHITE  0xffffff
 
  #define YELLOW 0xffff00
 
  #define YELLOW 0xffff00
Line 54: Line 51:
 
  #define GREEN  0x008000
 
  #define GREEN  0x008000
 
  #define BLUE  0x0000ff
 
  #define BLUE  0x0000ff
  #define BLACK  0x000000  
+
  #define BLACK  0x000000
+
Because it's RGB ( red green blue ) the first ff is making the red led go to it's maximum. The middle ff is for green and the last for blue. It works in hexadecimals so you can lower or make the density higher or lower. And mix them so that you can get different colors as for example yellow. 
 +
 
 +
Here the amount of time and steps in miliseconds is given for to make the fading go fluent.
 
  int nfadesteps = 30;
 
  int nfadesteps = 30;
 
  int delayms = 30;  
 
  int delayms = 30;  

Revision as of 11:34, 7 January 2016

Working with RGB leds on the WS2812

For Linux/Raspberry:

apt-get install ckermit

If you use and other device, or want to know more:

C-Kermit

For Windows users it's optional to use:

PuTTY 

RGB lighted paper Tree

Hardware used:

Software used on my linux pc:

  • C-kermit


Making the construction

The RGB leds:

RGBTree1.jpg

On ////J7 a connector is added, also an cable from the J1 was connected on pin 15 with the second pin from J7. The image further on explains itself. You still have to look out, that you let the pointers point away from the usb ws2812.


Paper tree: The paper tree is made by folding a green paper. On the folded green paper I put my RGB led connection. Around the RGB led I draw a Christmas tree. At the point every single RGB led were laying I put a dot with a pencil. After that I cut the tree and put holes only on paper with the pencil dots. After that I used some scotch tape to bring it all together. The final result:

RGBTree2.jpg

You can of course go all crazy with the tree by adding glitters and stuff like that.


The code

The c-program RGBTree.c can be downloaded: here.

What the code does in short is this: When starting up it will make the the top led (the peak) white. It will then read the for statement where it goes through all the leds under the peak. Every led will randomly get the color green or red. Then the script will keep fading the colors of the leds from to the opposite color. ( red to green or green to red )

The parts of the script that I will give some explanation:

Here I made a list of colors(if you also want other colors search for: color table):

#define WHITE  0xffffff
#define YELLOW 0xffff00
#define RED    0x800000
#define GREEN  0x008000
#define BLUE   0x0000ff
#define BLACK  0x000000

Because it's RGB ( red green blue ) the first ff is making the red led go to it's maximum. The middle ff is for green and the last for blue. It works in hexadecimals so you can lower or make the density higher or lower. And mix them so that you can get different colors as for example yellow.

Here the amount of time and steps in miliseconds is given for to make the fading go fluent.

int nfadesteps = 30;
int delayms = 30; 

int interpolate (int c1, int c2, int shift, int pos, int end)
{
  c1 >>= shift;
  c2 >>= shift;
  c1 &= 0xff;
  c2 &= 0xff;

  return c1 * (end-pos) / end + c2 * pos / end;
}

void fadeto (int pixnum, int col1, int col2)
{
   int i; 
   int r, g, b; 

   for (i=0;i <= nfadesteps;i++) {
      r = interpolate (col1, col2, 16, i, nfadesteps);
      g = interpolate (col1, col2,  8, i, nfadesteps);
      b = interpolate (col1, col2,  0, i, nfadesteps);
      printf ("pix %d %06x\n", pixnum, 
	 (r << 16) | (g << 8) | (b << 0)); 

      usleep (delayms*1000);
   }
}

int main (int argc, char **argv)
{
  int nleds = 10;
  int *pixels;
  int pixnum, newcolor;
  int i;
  
  if (argc > 1) 
    nleds = atoi (argv[1]);

  pixels = calloc (nleds, sizeof(int));
  
  printf ("pix %d %06x\n", nleds, WHITE);  

  for (i=0;i < nleds;i++){  
    if (random () % 2 == 0)
       pixels[i] = RED;
    else
       pixels[i] = GREEN;
    printf ("pix %d %06x\n", i, pixels[i]);  
  }

  while (1) {
     pixnum = random () % nleds; 
     if (pixels[pixnum] == RED) 
	newcolor = GREEN;
     else 
       newcolor = RED; 
     fadeto (pixnum, pixels[pixnum], newcolor);
     pixels[pixnum] = newcolor;
  }
  exit (0);

}
RGBThree.jpg

Useful links