FT230X

From BitWizard WIKI
Revision as of 16:29, 16 September 2014 by Tom (talk | contribs) (Created page with "This is the documentation page for the FT230X breakout board. == overview == The FT230X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB,...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is the documentation page for the FT230X breakout board.

overview

The FT230X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT230X chip.

External resources

pinout

The 12-pin connector is connected as follows:

5V3V3
RTSRXD
TXDCTS
CBUS3CBUS2
CBUS1CBUS0
GNDGND

LEDS

  • The board is equipped with a power-LED, an Rx-LED and a Tx-LED

Jumper settings

No jumpers this time :)

future hardware enhancements

Changelog

1.1

  • Initial public release