Difference between revisions of "I2C DAC"

From BitWizard WIKI
Jump to: navigation, search
Line 9: Line 9:
 
* Board outline: 25x25mm
 
* Board outline: 25x25mm
 
* Mounting hole diameter: 3mm
 
* Mounting hole diameter: 3mm
* Mounting hole pitch: 19mm (3mm from board edge)
+
* Mounting hole pitch: 19x19mm (3mm from board edge)
 
= using the board =
 
= using the board =
 
Set a voltage:
 
Set a voltage:

Revision as of 17:07, 21 March 2014

general info

Based on the MCP4726 chip from Microchip.
http://ww1.microchip.com/downloads/en/DeviceDoc/22272C.pdf

I2C address:
1100 000 and 1100 001 OR
1100 010 and 1100 011

physical dimensions

  • Board outline: 25x25mm
  • Mounting hole diameter: 3mm
  • Mounting hole pitch: 19x19mm (3mm from board edge)

using the board

Set a voltage:

sudo i2cset -y 1 0x60 0x40 0xff 0xf0 i
                             ^^   ^     < Voltage bits

explanation of the arguments:

-y    don't ask confirmation
1     number of the I2C bus (0 on older raspberry pi's)
0x60  address of the DAC, use 0x61 for the other DAC. 
0x40  configuration: normal. 
0xff  high 8 bits of the value
0xf0  lower four bits of the value (in the high nibble)