Difference between revisions of "Raspberry Pi camera extension kit"
(→Connecting everything) |
(→Connecting everything) |
||
Line 1: | Line 1: | ||
= Connecting everything = | = Connecting everything = | ||
+ | == Shipped after 20-07-2013 == | ||
+ | |||
+ | You can recognise this version by the way the connectors one the "camera board" convertor are mounted on opposite sides of the PCB.<br> | ||
+ | <br> | ||
+ | This is very straightforward:<br> | ||
+ | - Turn off your Raspberry Pi<br> | ||
+ | - Connect the opposite-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"<br> | ||
+ | - Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"<br> | ||
+ | - Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards<br> | ||
+ | <br> | ||
+ | And you're done! | ||
+ | |||
+ | == Shipped BEFORE 20-07-2013 == | ||
+ | |||
+ | You can recognise this version by the way the connectors one the "camera board" convertor are mounted on the same side of the PCB.<br> | ||
+ | <br> | ||
This is very straightforward:<br> | This is very straightforward:<br> | ||
- Turn off your Raspberry Pi<br> | - Turn off your Raspberry Pi<br> |
Revision as of 16:23, 19 July 2013
Connecting everything
Shipped after 20-07-2013
You can recognise this version by the way the connectors one the "camera board" convertor are mounted on opposite sides of the PCB.
This is very straightforward:
- Turn off your Raspberry Pi
- Connect the opposite-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"
- Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards
And you're done!
Shipped BEFORE 20-07-2013
You can recognise this version by the way the connectors one the "camera board" convertor are mounted on the same side of the PCB.
This is very straightforward:
- Turn off your Raspberry Pi
- Connect the same-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"
- Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards
And you're done!