Difference between revisions of "Solder jumpers"

From BitWizard WIKI
Jump to: navigation, search
(Created page with '== Solder jumpers == Trace still intact Carefully(!!!) cut the naroow trace between the middle and righ…')
(No difference)

Revision as of 13:19, 1 February 2012

Solder jumpers

Trace still intact
Trace still intact

Carefully(!!!) cut the naroow trace between the middle and right pad with a sharp knife:

Trace is cut
Trace is cut

Place a solder jumper over the other two pads:

New connection is created
New connection is created