Raspberry Juice
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Overview
The Raspberry Juice serves as a power switch for the Raspberry Pi. This expansion board can turn the power on or off at a scheduled time. shop link
Specifications
The Juice always uses about 2mA/10mW. The board is rated for a maximum current of 1A.
Use
The Raspberry Juice can be found using I2C or SPI at address 0xA4, and has the following read ports: All times are in ms, and are 32 bits in size.
Port | Returned value (in milliseconds) | |
---|---|---|
0x20 | Time until power off | |
0x21 | Time until power on | |
0x30 | button active | 0: don't react to button press. 1: react to button press (default), others: undefined. |
0x31 | external input active | 0: inactive (default), 1: active, others: undefined. |
0x32 | external input polarity | 0: active low (default), 1: active high, others: undefined. |
0x33 | power set on/off state | 0: off, 1: on, others: undefined. |
0x38 | button active powerupstate | 0: don't react to button press. 1: react to button press (default), others: undefined. |
0x39 | external input active powerupstate | 0: inactive (default), 1: active, others: undefined. |
0x3a | external input polarity powerupstate | 0: active low (default), 1: active high, others: undefined. |
0x3b | power set on/off state powerupstate | 0: off, 1: on, others: undefined. |
Additionally, the following can be written to the Juice:
Port | Effect | |
---|---|---|
0x20 | Set the time in milliseconds until power off | |
0x21 | Set the time in milliseconds until power on | |
0x30 | button active | 0: don't react to button press. 1: react to button press (default), others: undefined. |
0x31 | external input active | 0: inactive (default), 1: active, others: undefined. |
0x32 | external input polarity | 0: active low (default), 1: active high, others: undefined. |
0x33 | power set on/off state | 0: off, 1: on, others: undefined. |
0x38 | button active powerupstate | 0: don't react to button press. 1: react to button press (default), others: undefined. |
0x39 | external input active powerupstate | 0: inactive (default), 1: active, others: undefined. |
0x3a | external input polarity powerupstate | 0: active low (default), 1: active high, others: undefined. |
0x3b | power set on/off state powerupstate | 0: off, 1: on, others: undefined. |
So, for instance, writing 10000 to port 0x21 and 1000 to 0x20 will cut the power in 1 second, and then turn on the power 9 seconds later.