Search results
Jump to navigation
Jump to search
Page title matches
- This is the documentation page for the FTDI-serial 2 board. That you can buy in the [http://www.bitwizard.nl/shop/usb-boards/usb The FTDI-serial 2 board has an USB connector and a 4-pin serial/UART connector. The brains of964 bytes (151 words) - 17:53, 6 November 2015
- #REDIRECT [[FTDI serial 2]]27 bytes (3 words) - 11:07, 24 December 2015
- #REDIRECT [[Raspberry Pi User Interface with 16 x 2 LCD with a console serial cable]]85 bytes (13 words) - 13:14, 16 January 2013
- 687 bytes (130 words) - 13:34, 16 January 2013
Page text matches
- == Step 2 == [[File:DMX_case_5.jpg|400px|DMX case - step 2]]1 KB (237 words) - 17:02, 31 December 2023
- This is the documentation page for the FTDI-serial 2 board. That you can buy in the [http://www.bitwizard.nl/shop/usb-boards/usb The FTDI-serial 2 board has an USB connector and a 4-pin serial/UART connector. The brains of964 bytes (151 words) - 17:53, 6 November 2015
- #REDIRECT [[FTDI serial 2]]27 bytes (3 words) - 11:06, 24 December 2015
- #REDIRECT [[FTDI serial 2]]27 bytes (3 words) - 11:07, 24 December 2015
- <tr><td>2</td><td>GND</td></tr> 1-2: 3V3<br>1 KB (226 words) - 17:52, 6 November 2015
- <tr><td>2</td><td>GND</td></tr> <tr><td>4</td><td>pin 2</td></tr>4 KB (818 words) - 14:23, 1 February 2012
- == Working with 2 7FETs Stepper motors == ...ETs( on spi1 ). The other 7FETS also of course has 88 as address. ( On the 2 dots there has to be a hexadecimal number. )4 KB (666 words) - 14:04, 23 November 2015
- | 2 || VCC || power | 1 || 22 KB (309 words) - 10:50, 10 March 2015
- * The only jumper Is for selecting the I/O voltage. 1-2 = 1V8, 2-3 = 3V3.1 KB (210 words) - 17:50, 6 November 2015
- * 2 GND * 2 GND1 KB (167 words) - 11:07, 2 October 2023
- ...t the common-cathode version. This connects all the cathodes to GND (pin 1/2) and then all the inputs to the leds. This results in normal logic: the led To test the 16LED, connect the GND (pin 1 or 2) to any of the GND pins on your board.3 KB (445 words) - 12:59, 11 November 2015
- ...ed 25 through 28. The other pins are numbered 1,3,5,...-23 on one side and 2,4,6,...-24 on the other side. <tr><td>1,2,7,8,10</td><td>GND</td></tr>1 KB (196 words) - 13:05, 11 November 2015
- ...ible that the menu goes up and down and that I then can select between the 2 options displayed on the first and second line of the Rp_ui_board([[User In *2. Select option 26 KB (994 words) - 12:21, 19 November 2015
- | 2 || SDA || Serial I2C Data | 2 || SDA || A4 (Analog input 4) || Digital 20934 bytes (149 words) - 12:12, 10 December 2015
- <tr><td>GND</td><td>1</td><td>2</td><td>VCC</td></tr> * 1-2 3.3V2 KB (303 words) - 18:20, 26 July 2023
- JP1: 2-3<br> JP1: 1-2<br>4 KB (686 words) - 14:55, 17 July 2012
- | 2 || C 1 || center connection for relay 1 | 4 || NO 2 || Normally open contact for relay 24 KB (570 words) - 13:15, 11 November 2015
- sprintf(bufline2, "1=down |2=up |5=res", bufline2); if (Button == 2){4 KB (517 words) - 12:55, 9 February 2016
- | 2 || IO0 | 2 || VCC2 KB (268 words) - 14:06, 10 December 2015
- <tr><td>2</td><td>Rx (R)</td><td>do not drive at 5V level if jumper is set to 3.3v.<b 1-2: 3V3 (jumper on the side nearest the chip and USB connector)<br>2 KB (333 words) - 17:53, 6 November 2015