Search results

Page title matches

• Ftdi serial 2
  #REDIRECT [[FTDI serial 2]]
  27 bytes (3 words) - 11:07, 24 December 2015
• FTDI serial 2
  This is the documentation page for the FTDI-serial 2 board. That you can buy in the [http://www.bitwizard.nl/shop/usb-boards/usb The FTDI-serial 2 board has an USB connector and a 4-pin serial/UART connector. The brains of
  964 bytes (151 words) - 17:53, 6 November 2015
• Raspberry Pi User Interface with 16 x 2 LCD
  #REDIRECT [[Raspberry Pi User Interface with 16 x 2 LCD with a console serial cable]]
  85 bytes (13 words) - 13:14, 16 January 2013
• Raspberry Pi User Interface with 16 x 2 LCD with a console serial cable
  687 bytes (130 words) - 13:34, 16 January 2013

Page text matches

• Assembling the DMX case
  == Step 2 == [[File:DMX_case_5.jpg‎|400px|DMX case - step 2]]
  1 KB (237 words) - 17:02, 31 December 2023
• FTDI serial 2
  This is the documentation page for the FTDI-serial 2 board. That you can buy in the [http://www.bitwizard.nl/shop/usb-boards/usb The FTDI-serial 2 board has an USB connector and a 4-pin serial/UART connector. The brains of
  964 bytes (151 words) - 17:53, 6 November 2015
• Ftdi serial
  #REDIRECT [[FTDI serial 2]]
  27 bytes (3 words) - 11:06, 24 December 2015
• Ftdi serial 2
  #REDIRECT [[FTDI serial 2]]
  27 bytes (3 words) - 11:07, 24 December 2015
• FT245RL breakout board
  <tr><td>2</td><td>GND</td></tr> 1-2: 3V3<br>
  1 KB (226 words) - 17:52, 6 November 2015
• Cyclone dev board
  <tr><td>2</td><td>GND</td></tr> <tr><td>4</td><td>pin 2</td></tr>
  4 KB (818 words) - 14:23, 1 February 2012
• Blog 16
  == Working with 2 7FETs Stepper motors == ...ETs( on spi1 ). The other 7FETS also of course has 88 as address. ( On the 2 dots there has to be a hexadecimal number. )
  4 KB (666 words) - 14:04, 23 November 2015
• SPI connector pinout
  | 2 || VCC || power | 1 || 2
  2 KB (309 words) - 10:50, 10 March 2015
• FT240X
  * The only jumper Is for selecting the I/O voltage. 1-2 = 1V8, 2-3 = 3V3.
  1 KB (210 words) - 17:50, 6 November 2015
• STM32 development board
  * 2 GND * 2 GND
  1 KB (167 words) - 11:07, 2 October 2023
• 16 LEDs
  ...t the common-cathode version. This connects all the cathodes to GND (pin 1/2) and then all the inputs to the leds. This results in normal logic: the led To test the 16LED, connect the GND (pin 1 or 2) to any of the GND pins on your board.
  3 KB (445 words) - 12:59, 11 November 2015
• Iphone 3GS camera
  ...ed 25 through 28. The other pins are numbered 1,3,5,...-23 on one side and 2,4,6,...-24 on the other side. <tr><td>1,2,7,8,10</td><td>GND</td></tr>
  1 KB (196 words) - 13:05, 11 November 2015
• Blog 13
  ...ible that the menu goes up and down and that I then can select between the 2 options displayed on the first and second line of the Rp_ui_board([[User In *2. Select option 2
  6 KB (994 words) - 12:21, 19 November 2015
• I2C connector pinout
  | 2 || SDA || Serial I2C Data | 2 || SDA || A4 (Analog input 4) || Digital 20
  934 bytes (149 words) - 12:12, 10 December 2015
• FT2232H breakout board
  <tr><td>GND</td><td>1</td><td>2</td><td>VCC</td></tr> * 1-2 3.3V
  2 KB (303 words) - 18:20, 26 July 2023
• PiPower
  JP1: 2-3<br> JP1: 1-2<br>
  4 KB (686 words) - 14:55, 17 July 2012
• USB Relay
  | 2 || C 1 || center connection for relay 1 | 4 || NO 2 || Normally open contact for relay 2
  4 KB (570 words) - 13:15, 11 November 2015
• Blog 26
  sprintf(bufline2, "1=down |2=up |5=res", bufline2); if (Button == 2){
  4 KB (517 words) - 12:55, 9 February 2016
• Dio breakout
  | 2 || IO0 | 2 || VCC
  2 KB (268 words) - 14:06, 10 December 2015
• FTDI serial
  <tr><td>2</td><td>Rx (R)</td><td>do not drive at 5V level if jumper is set to 3.3v.<b 1-2: 3V3 (jumper on the side nearest the chip and USB connector)<br>
  2 KB (333 words) - 17:53, 6 November 2015

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)