Difference between revisions of "Assembling the DMX case"

From BitWizard WIKI
Jump to: navigation, search
(Created page with "= Assembling the DMX case = DMX case == Included == Included screws and washers/spacers 10x m3x6 4x m3x12 4x m2.5x10 4x m3x4mm spacer ...")
 
(Step 1)
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
= Assembling the DMX case =  
 
= Assembling the DMX case =  
  
[[File:DMX_case_9.jpg‎|600px|DMX case]]
+
[[File:DMX_case_complete.jpg‎|600px|DMX case]]
  
 
== Included ==
 
== Included ==
Included screws and washers/spacers
+
 
 +
Included screws and spacers
 +
7x M3X6 6+1 screw
 +
4x M2.5x10 screw
 +
4X M2.5X12MM (If we're our of 12mm, we'll send 16mm)
 +
M2.5x4MM spacer
 +
4X M2.5X20MM FF spacer
 +
4X M2.5X6MM  screw
 +
 
 +
=== OLD: ===
 +
We've switched from M3 sized screws that you have to force through the RPI to M2.5 as was
 +
intended by the RPI people.
 
  10x m3x6
 
  10x m3x6
4x m3x12
+
  4x m3x12
4x m2.5x10
+
  4x m2.5x10
4x m3x4mm spacer
+
  4x m3x4mm spacer
4x m3x18mm spacer
+
  4x m3x20mm spacer
12x m3 plastic washer
 
  
 
== Step 1 ==
 
== Step 1 ==
  
  4x m3x6
+
  4x m2.5x6
  4x m3x12
+
  4x m2.5x12
  4x m3x4mm spacer
+
  4x m2.5x4mm spacer
  4x m3x18mm spacer
+
  4x m2.5x20mm spacer
12x m3 plastic washer
 
  
 
[[File:DMX_case_1.jpg‎|400px|DMX case - step 1]]
 
[[File:DMX_case_1.jpg‎|400px|DMX case - step 1]]
 +
 +
[[File:DMX_case_2.jpg‎|400px|DMX case - step 1]]
  
 
[[File:DMX_case_3.jpg‎|400px|DMX case - step 1]]
 
[[File:DMX_case_3.jpg‎|400px|DMX case - step 1]]
Line 29: Line 40:
  
 
[[File:DMX_case_5.jpg‎|400px|DMX case - step 2]]
 
[[File:DMX_case_5.jpg‎|400px|DMX case - step 2]]
 +
 +
[[File:DMX_case_6.jpg‎|400px|DMX case - step 2]]
 +
 +
[[File:DMX_case_7.jpg‎|400px|DMX case - step 2]]
  
 
== Step 3 ==
 
== Step 3 ==
Line 35: Line 50:
 
  4x m2.5x10
 
  4x m2.5x10
  
[[File:DMX_case_6.jpg‎|400px|DMX case - step 3]]
+
[[File:DMX_case_8.jpg‎|400px|DMX case - step 3]]
  
[[File:DMX_case_7.jpg‎|400px|DMX case - step 3]]
+
[[File:DMX_case_9.jpg‎|400px|DMX case - step 3]]
  
[[File:DMX_case_8.jpg‎|400px|DMX case - step 3]]
+
[[File:DMX_case_10.jpg‎|400px|DMX case - step 3]]
 +
 
 +
[[File:DMX_case_11.jpg‎|400px|DMX case - step 3]]
 +
 
 +
[[File:DMX_case_12.jpg‎|400px|DMX case - step 3]]
 +
 
 +
[[File:DMX_case_13.jpg‎|400px|DMX case - step 3]]

Latest revision as of 16:02, 31 December 2023

Assembling the DMX case

DMX case

Included

Included screws and spacers

7x M3X6 6+1 screw
4x M2.5x10 screw
4X M2.5X12MM (If we're our of 12mm, we'll send 16mm) 
M2.5x4MM spacer 
4X M2.5X20MM FF spacer 
4X M2.5X6MM  screw

OLD:

We've switched from M3 sized screws that you have to force through the RPI to M2.5 as was intended by the RPI people.

10x m3x6
 4x m3x12
 4x m2.5x10
 4x m3x4mm spacer
 4x m3x20mm spacer

Step 1

4x m2.5x6
4x m2.5x12
4x m2.5x4mm spacer
4x m2.5x20mm spacer

DMX case - step 1

DMX case - step 1

DMX case - step 1

DMX case - step 1

Step 2

DMX case - step 2

DMX case - step 2

DMX case - step 2

Step 3

6x m3x6
4x m2.5x10

DMX case - step 3

DMX case - step 3

DMX case - step 3

DMX case - step 3

DMX case - step 3

DMX case - step 3