Difference between revisions of "Blog 10"

From BitWizard WIKI
Jump to: navigation, search
(Created page with " == Push menu == 1. Temperature (From blog 05) 2. Time with load averages (From blog 04) 3. CPU + GPU (From blog 08) 4. Temperature at weather station (From ...")
 
Line 35: Line 35:
 
  #!/bin/bash  
 
  #!/bin/bash  
 
   
 
   
  Print=showtemp2
+
  #Print=showtemp2
  Print=time_load
+
  #Print=time_load
  Print=DIAMoscow2
+
  #Print=DIAMoscow2
  Print=cgpu2
+
  #Print=cgpu2
  Print=DIAMWind
+
  #Print=DIAMWind
 
  Print=ui
 
  Print=ui
 
  bw_tool -I -D /dev/i2c-1 -a 94 -w 10:00  
 
  bw_tool -I -D /dev/i2c-1 -a 94 -w 10:00  

Revision as of 12:37, 24 September 2015

Push menu

1. Temperature  (From blog 05)
2. Time with load averages (From blog 04)
3. CPU + GPU (From blog 08)
4. Temperature at weather station (From blog 09) 
5. Wind a weather station (From blog 09) 
6. Defining Temperature ( not visible on display! ) (From blog 05)

I used previous codes, but I copied them in a new version. Example

cp timer > time_load 

You have to make the script get to the basic, so that it only prints. So things like this has to be removed:

while true
done
echo 
10:00/11:00

Note! You shouldn't delete 11:20, because the script from pushmenu isn't made to to also remove the second line. It only cleans first row with 11:00.

Example from the 'Time with load averages':

#!/bin/bash

DISPL="bw_tool -I -D /dev/i2c-1 -a 94"

       load=`cut -d' ' -f-3 /proc/loadavg`
       $DISPL -t `date +%H:%M:%S`
       $DISPL -W 11:20:b
       $DISPL -t $load
#!/bin/bash 

#Print=showtemp2
#Print=time_load
#Print=DIAMoscow2
#Print=cgpu2
#Print=DIAMWind
Print=ui
bw_tool -I -D /dev/i2c-1 -a 94 -w 10:00 

while true; do
  # kijk naar de knoppen
  Button=`bw_tool -I -D /dev/i2c-1 -a 94 -R 30:b`
  if [ $Button  = "20" ]; then 
    bw_tool -I -D /dev/i2c-1 -a 94 -w 10:00
    Print=showtemp2
  fi  

  if [ $Button  = "10" ]; then 
    bw_tool -I -D /dev/i2c-1 -a 94 -w 10:00
    Print=time_load
  fi 

  if [ $Button  = "08" ]; then 
    bw_tool -I -D /dev/i2c-1 -a 94 -w 10:00
    Print=cgpu2
  fi

  if [ $Button  = "04" ]; then 
    bw_tool -I -D /dev/i2c-1 -a 94 -w 10:00
    Print=DIAMoscow
  fi

  if [ $Button  = "02" ]; then 
    bw_tool -I -D /dev/i2c-1 -a 94 -w 10:00
    Print=DIAMWind
  fi

  if [ $Button  = "01" ]; then 
    bw_tool -I -D /dev/i2c-1 -a 94 -w 10:00
    Print=ui
  fi

  bw_tool -I -D /dev/i2c-1 -a 94 -w 11:00
  ./$Print

  sleep 1
done

All the 6 buttons reference to 6 scripts:

1. Temperature
2. Time 
3. CPU +GPU
4. Temperature at weather station
5. Wind at weather station 
6. ui

It directly removes everything from display. (10:00)

Then it will start the while loop. ( while true; do) When started it will first look if it detects which button is pressed.

After that I made 6 if statements to check of that button is pressed. ( to detect which button gives which number:

bw_tool -I -D /dev/i2c-1 -a 94 -R 30:b
01

) Press the number you want to know and press the button.

At the end it says it has to place on the line 11:00 and with ./$print he that finally print the every second the one information from the button pressed.

Thanks to the sleep you now have to wait a second to recognize the different button you pressed. Because it has to go trough that list again in that 1 sec.