Blog 15

From BitWizard WIKI
Revision as of 10:13, 29 October 2015 by Cartridge1987 (talk | contribs) (Created page with "== Working with stepper motor == In this post I am going to connect a stepper motor with my Arduino. I want the stepper motor to turn left and right, and I want the stepper m...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Working with stepper motor

In this post I am going to connect a stepper motor with my Arduino. I want the stepper motor to turn left and right, and I want the stepper motor to turn a certain degrees.

Before programming I first need to connect the Arduino with the stepper motor.

The hardware I used:

  • 7fets
  • 28BYJ-48 Stepper Motor

( I also posted in Blog 14, I connected the 7fets with an lcd + display. This is something what of course is not needed )