Difference between revisions of "FT220X"

From BitWizard WIKI
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
[[File:FT220X.jpg|thumb|300px]]
 
[[File:FT220X.jpg|thumb|300px]]
  
This is the documentation page for the FT220X breakout board.  
+
This is the documentation page for the FT220X breakout board. That can be bought in the [http://www.bitwizard.nl/shop/breakout-boards/ft220x-breakout-board BitWizard shop].
  
== overview ==
+
== Overview ==
  
 
The FT220X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT220X chip.
 
The FT220X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT220X chip.
Line 12: Line 12:
 
* [http://www.ftdichip.com/Products/ICs/FT220X.html FTDI product page]
 
* [http://www.ftdichip.com/Products/ICs/FT220X.html FTDI product page]
  
== pinout ==
+
== Pinout ==
  
 
The 12-pin connector is connected as follows:
 
The 12-pin connector is connected as follows:
Line 34: Line 34:
 
No jumpers this time :)
 
No jumpers this time :)
  
== future hardware enhancements ==
+
== Future hardware enhancements ==
  
  

Latest revision as of 16:48, 6 November 2015

FT220X.jpg

This is the documentation page for the FT220X breakout board. That can be bought in the BitWizard shop.

Overview

The FT220X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT220X chip.

External resources

Pinout

The 12-pin connector is connected as follows:

5V3V3
MIOSI2MIOSI3
MIOSI0MIOSI1
CBUS3MISO
CS#CLK
GNDGND

Please note: On version 1.1 of the boards, the silkscreen markings for MIOSI1 and MIOSI3 are switched!

LEDS

  • The only LED is a power LED

Jumper settings

No jumpers this time :)

Future hardware enhancements

Changelog

1.1

  • Initial public release