Difference between revisions of "FT230X"

From BitWizard WIKI
Jump to: navigation, search
(Created page with "This is the documentation page for the FT230X breakout board. == overview == The FT230X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB,...")
 
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
This is the documentation page for the FT230X breakout board.  
+
[[File:FT230X.jpg|thumb|300px]]
  
== overview ==
+
This is the documentation page for the FT230X breakout board. That can be bought in the [http://www.bitwizard.nl/shop/breakout-boards/ft230x-breakout-board BitWizard shop].
 +
 
 +
== Overview ==
  
 
The FT230X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT230X chip.
 
The FT230X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT230X chip.
Line 10: Line 12:
 
* [http://www.ftdichip.com/Products/ICs/FT230X.html FTDI product page]
 
* [http://www.ftdichip.com/Products/ICs/FT230X.html FTDI product page]
  
== pinout ==
+
== Pinout ==
  
 
The 12-pin connector is connected as follows:
 
The 12-pin connector is connected as follows:
Line 16: Line 18:
 
<table border=1>
 
<table border=1>
 
<tr><td>5V</td><td>3V3</td></tr>
 
<tr><td>5V</td><td>3V3</td></tr>
<tr><td>RTS</td><td>RXD</td></tr>
+
<tr><td>RTS#</td><td>RXD</td></tr>
<tr><td>TXD</td><td>CTS</td></tr>
+
<tr><td>TXD</td><td>CTS#</td></tr>
 
<tr><td>CBUS3</td><td>CBUS2</td></tr>
 
<tr><td>CBUS3</td><td>CBUS2</td></tr>
 
<tr><td>CBUS1</td><td>CBUS0</td></tr>
 
<tr><td>CBUS1</td><td>CBUS0</td></tr>
Line 26: Line 28:
  
 
* The board is equipped with a power-LED, an Rx-LED and a Tx-LED
 
* The board is equipped with a power-LED, an Rx-LED and a Tx-LED
 +
 
== Jumper settings ==
 
== Jumper settings ==
  
 
No jumpers this time :)
 
No jumpers this time :)
  
== future hardware enhancements ==
+
== Future hardware enhancements ==
  
  

Latest revision as of 16:49, 6 November 2015

FT230X.jpg

This is the documentation page for the FT230X breakout board. That can be bought in the BitWizard shop.

Overview

The FT230X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT230X chip.

External resources

Pinout

The 12-pin connector is connected as follows:

5V3V3
RTS#RXD
TXDCTS#
CBUS3CBUS2
CBUS1CBUS0
GNDGND

LEDS

  • The board is equipped with a power-LED, an Rx-LED and a Tx-LED

Jumper settings

No jumpers this time :)

Future hardware enhancements

Changelog

1.1

  • Initial public release