From BitWizard WIKI
Revision as of 17:30, 16 September 2014 by Tom
This is the documentation page for the FT240X breakout board.
The FT240X breakout board has an USB connector, one 20-pin IO connector. The brains of the PCB, of course, is an FT240X chip.
The 20-pin connector is connected as follows:
- The only LED is a power LED
- The only jumper Is for selecting the I/O voltage. 1-2 = 1V8, 2-3 = 3V3.
future hardware enhancements
- Initial public release