Based on the MCP4726 chip from Microchip.
1100 000 and 1100 001 OR
1100 010 and 1100 011
You can order both versions. The addresses of your board can be found on the bottom side.
- Board outline: 25x25mm
- Mounting hole diameter: 3mm
- Mounting hole pitch: 19x19mm (3mm from board edge)
using the board
Set a voltage:
sudo i2cset -y 1 0x60 0x40 0xff 0xf0 i ^^ ^ < Voltage bits
explanation of the arguments:
-y don't ask confirmation 1 number of the I2C bus (0 on older raspberry pi's) 0x60 address of the DAC, use 0x61 for the other DAC. 0x40 configuration: normal. 0xff high 8 bits of the value 0xf0 lower four bits of the value (in the high nibble)