Raspberry Pi camera extension kit

From BitWizard WIKI
Revision as of 15:16, 14 June 2013 by Tom (talk | contribs) (Connecting everything)

Jump to: navigation, search

Connecting everything

This is very straightforward:
- Turn off your Raspberry Pi
- Connect the same-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"
- Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards

And you're done!