Solder jumpers

From BitWizard WIKI
Revision as of 17:06, 4 November 2016 by Rew (talk | contribs) (Solder jumpers)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Solder jumpers

Trace still intact
Trace still intact

Carefully(!!!) cut the narrow trace between the middle and right pad with a sharp knife:

Trace is cut
Trace is cut

Note that you can now see the bare color of the PCB, a yellowish colour. The green you know from PCBs is the solder mask that is often used.

Place a solder jumper over the other two pads:

New connection is created
New connection is created